SSBC Stainless Steel Brakes logo
SSBC phone number 800-448-7722
SSBC brake product search
 
     
 
performance disc brake products
Force 10 Elite 4-Piston Aluminum Caliper

Made from billet aluminum, the Elite series caliper is a lightweight alternative to heavy, ugly cast iron and aluminum calipers.

Constructed from:Aluminum
Number of pistons:4
Piston size:45mm
Standard finish:Clear anodized
Optional finishes:Powder coating or polishing
Force 10 aluminum caliper clear anodized finish
Standard clear anodized finish.

  • A 4-piston caliper with 45mm stainless steel pistons
  • Lightweight aluminum reduces “unsprung weight” for better ride quality
  • Smooth face design - no bolt holes on the front
  • Hidden bleeder screws and anti-rattle clips come standard
  • Corrosion-free stainless steel pistons minimize heat transfer to the brake fluid for optimum performance
  • Comes standard with a clear anodized finish; optional powder-coating or polishing available
  • DOT design with dust seals
  • Front kits available for Street Rods (Mustang II and straight axles)
  • Rear kits available for Ford 8" & 9", GM 10 & 12 bolt and 1955-70 Chevy fullsize car rear ends
  • Also available as a direct bolt on replacement for the commonly used calipers with .810” thick rotors & 5.25” caliper mounting bolt spacing
  • Use the Product Search located at the top of the page to find brakes for your application

What makes this caliper elite?

A lot of engineering has gone into making this the best caliper available:

  • smooth face design (no bolt holes on the front)
  • plated bolts
  • anti-rattle pad clips
  • center inlet for left or right mounting
  • hidden bleeder screws
  • no external transfer tubes (fluid transferred internally)
Force 10 Elite 4-piston aluminum caliper
Example of optional powder coating and polishing.

Product Features
Force 10 Elite 4-piston aluminum caliper close up 1

1.Anti-rattle clips keeps pads quite & protects calipers.
2.Uses pad bolts - not pins - to help reduce rattling & to securely fasten pads.
3.Uses standard pads (FMSI & DOT) available through most auto parts stores.
 Force 10 Elite 4-piston aluminum caliper close up 2

4.All plated bolts.
5.Center inlet for universal mounting (no left or right caliper).
6.Four 45mm stainless steel pistons (DOT design) with dust seals for longer life.
7.Hidden bleeder screws for a clean look.





All information subject to change without notice.
Photographs are for illustrative purposes only and may not be the exact kit listed.
Minimum wheel size can vary due to the wide assortment of wheels.